(Filled
urethane system with low viscosity, after curing, exhibiting
very good electric properties、mechanic
properties and low water absorption, suited for potting or
casting of electric electronic units. )
l
Properties:
|
Item |
Testing
Method or Unit |
W-586A/B |
|
Appearance |
A |
By
visual |
Brown
liquid |
|
B |
Black
liquid |
|
Viscosity |
A |
25℃
mPa·s |
50-100 |
|
B |
3000-5000 |
|
A+B |
500-1000 |
|
Density |
A |
25℃
g/cm3 |
1.13±0.05 |
|
B |
1.36±0.05 |
|
Tack-free time |
30g 25℃
min |
>30 |
|
Mixing
Proportion |
By
weight |
A
：B=25~30
：100 |
|
Curing Schedule |
℃/h |
25℃/24
or 60/3-4 |
|
Shelf
life |
R.T.
sealed |
3 months |
l
Properties after
Curing：
|
Item |
Testing
Method or Condition |
|
|
Hardness |
Shore-A |
85±5 |
|
Volume
Resistance |
25℃，Ω·cm |
>1013 |
|
Water
Absorption |
24h, 25℃，% |
<0.3 |
|
Insulation Strength |
25℃，kV/mm |
>20 |
|
Tensile
strength |
MPa |
12 |
|
Flammability |
UL-94 |
V-0 |
l
Storage:
The products
should be stored in a dry place and in the tightly closed
original container. Under these conditions their shelf life
will be as shown above.
l
Packaging:
W-586A: 20kg
metal container.
W-586B: 18kg
metal container.
l
Remarks:
(Working Place
Safe Protection)
Working
Overall Needed
Gloves Must
Sleeve Recommended while contacting skin
Goggle/ Safety
Glass Needed
Anti-toxic Mask/
Anti-dust Mask Not needed
( Skin
Protection)
Before
Working Bare skin need to be rubbed with
protection oil or paste.
After
Working Rubbed with protection or nutrition oil
or paste.
Contaminated
skin washing Slightly rub with paper tissue, then wash
with warm water and non-alkali soap, Don’t use solvents!
( Cleaning for
the working place)
Use light color
paper to cover working table, or use disposable beaker etc.
( Spilled
materials tereatment)
Use sawn wood
powder or cotton to absorb it, then put into Garbage Bin
lined with plastic film.
(Ventilation)
Workshop
Vent, often have air changing
Working
Place Install Vent Fan, Prevent from inhaling
steam.
Ú
Note:
The data above are typical tested at a relative humidity of
70 % and a temperature of 25℃.
They are just for customers’ reference. We cannot wholly
guarantee all the listed data will be reached under specific
test conditions. When applying the product, the customers
should use data obtained through their own testing.
